Strong and fast formula in a precise dispensing tool.
The same strong and fast-setting Gorilla Super Glue Gel formula, in a precise dispensing tool designed to fit comfortably in-hand. Gorilla Super Glue Gel Micro Precise is incredibly easy to use and provides users with ultimate control and accuracy- perfect for projects where precision is key.
Anti-Clog Cap
Fast Setting
High Strength
Impact Tough
Precise Dispensing
Metal, wood, ceramic, leather, paper, rubber, plastics, porcelain, stone and more! *
*Not recommended for use on polyethylene or polypropylene plastic or similar materials.
Formulated for impact resistance and strength.
Precise dispensing tool designed to fit comfortably in the hand.
Dries in just 10-45 seconds, with no gripping required.†
†Press the two surfaces together for 10-45 seconds.
Keeps super glue from drying out. It’s Gorilla Tough use after use.
Protect work area from spills. Clean and dry the surfaces to be bonded. To puncture seal on tube, tighten white nozzle firmly.
Apply a small amount of Gorilla Super Glue Micro Precise to one surface. Only one drop per 6.5cm2 recommended.
To dispense, squeeze, the side of the bottle. The harder you squeeze, the more glue will dispense.
Press the two surfaces together between 10-45 seconds.
Set time can vary based on amount of glue and type of surface glued. Excess glue can cause delayed or failed bond. Wait 24 hours for full cure.
Gorilla Super Glue is a cyanoacrylate adhesive, while Gorilla Glue is a polyurethane. Unlike Gorilla Glue, Gorilla Super Glue does not foam or require moisture to activate. In addition, Gorilla Super Glue is recommended primarily for indoor applications only and is ideal for smaller repairs that require an instant bond and projects where clamping is not needed.
Gorilla Super Glue is designed with a specific formula for increased impact resistance to handle wear and tear.
Gorilla Super Glue has been engineered to achieve excellent results on difficult to bond substrates. It is formulated to bond a wide range of ,materials including most plastics, metals, elastomers (vinyl/rubber), wood, and porous surfaces.
Certain difficult to bond plastics, such as polyethylene (PE) and polypropylene (PP), or glass will not form good bonds. If you would like more information on how Gorilla Super Glue bonds to specific substrates, please contact our technical team via the ‘Contact Us’ section on the website for assistance.
Gorilla Super Glue is best applied at room temperature. Once cured Gorilla Super Glue can hold strong between -53°C to 104°C.
Gorilla Super Glue is not waterproof and we cannot recommend our products are safe to use in projects with aquatic life.
The approximate shelf life of Gorilla Super Glue is up to 18-24 months unopened from date of manufacture. Once opened there is no standard time, it will be dependent on storage conditions and age of the product, up to 6 months is a good guideline.
Product age, incorrect storage and aftercare can cause your adhesive to set and harden. For the optimum longevity of your Gorilla Super Glue store in a cool, dry area, avoid storing in high moisture prone areas such as bathrooms, kitchens, utility rooms and do not refrigerate.
To remove Gorilla Super Glue from your skin, soak the bonded area in warm, soapy water. Acetone (such as nail varnish remover) may also be used according to the solvent manufacturer’s instructions. The key is to be patient and NEVER pull the area apart. Gently wiggle the bonded area to allow the soapy water or acetone to penetrate the bond. After soaking, the adhesive should come off easily. Keep in mind that acetone can strip your skin of oils, so apply moisturiser after removal.
To remove uncured Gorilla Super Glue, use a towel dampened with acetone or isopropyl alcohol to blot the area. Several applications may be necessary to completely remove the uncured glue. For removal of cured Gorilla Super Glue from the surface of your project, soak bonded area with warm soapy water or acetone. The adhesive should begin to soften, but many applications may be necessary. Keep in mind that isopropyl alcohol and acetone can damage some surface materials, such as countertops and some plastics. Always test in a small, unseen area first.
Gorilla Super Glue is not intended for any application with direct or indirect food contact and should not be stored near food or in the refrigerator.
For medical emergencies, seek medical assistance immediately. For medical emergencies only, call the Australian Poison Centre number: 13 11 26. For animal emergencies, contact a vet or animal specialist immediately.
The incredibly strong adhesive you can trust for the toughest jobs.
The incredibly strong adhesive you can trust for the toughest jobs.
The crystal-clear glue for virtually invisible fixes.
The crystal-clear glue for virtually invisible fixes.
The tough tape that combines high strength with ultimate clarity.
The tough tape that combines high strength with ultimate clarity.
Perfect for instantly repairing emergency leaks.
Perfect for instantly repairing emergency leaks.
Tough, fast setting and Impact Tough.
Tough, fast setting and Impact Tough.
Tough, fast setting, no-run formula.
Tough, fast setting, no-run formula.
How to
