The hard-working, water resistant wood glue.
Our most durable wood glue, this Ultimate formula is 100% waterproof and incredibly strong, but still easily cleans up with water. It is great for outdoor applications where temperatures or moisture might be a concern, as well as interior projects that could benefit from the extended working time and high strength.
100% Waterproof
All-Weather
Open time up to 15-minutes
1. Clean and dry surfaces to be bonded.
2. Shake well before use.
3. Apply glue generously to the surface.
4. Join and clamp for 20-30 minutes. Parts should fit tightly.
5. Excess glue can be removed with a clean, wet cloth or scraped off after glue dries.
6. Allow bond to dry for 24 hours.
7. Remove applicator tip to clean out glue build up.
Application temperature should be at or above 50°F. Before finishing, sand surfaces to minimize glue exposure. Not recommended for structural or load bearing applications and not for continuous submersion or below-waterline use.
Material can be thinned down by shaking the bottle vigorously.
To clean the bottle tip, use a clean, damp cloth to wipe off excess glue after closing. If tip becomes clogged with dry glue, remove the cap, pull off the nozzle, and push the clog backward with a toothpick, then rinse cap with warm water. If you have difficulty pulling up on the nozzle, use a pair of pliers or scissors placed at the base of the nozzle and twist slightly.
No, this adhesive is not recommended for direct or indirect food contact.
To remove Gorilla Wood Glue Ultimate from fingers and nails, wash with soap and warm water.
To clean up while glue is wet, use a clean, damp cloth to wipe off excess glue. Make as many passes as needed with the clean area of the cloth to remove all the glue. When areas have completely dried, sand as needed. To clean up glue that has dried, use a sharp putty knife, razor, or sharp scraper to shave hardened glue from surface, then sand as needed.
Yes, simply shake the bottle vigorously until all the liquid has mixed back in.
The incredibly strong adhesive you can trust for the toughest jobs.
The incredibly strong adhesive you can trust for the toughest jobs.
The all purpose epoxy putty stick.
The all purpose epoxy putty stick.
The tough tape that combines high strength with ultimate clarity.
The tough tape that combines high strength with ultimate clarity.
The flexible, all-round glue that’s 100% waterproof.
The flexible, all-round glue that's 100% waterproof.
The crystal-clear glue for virtually invisible fixes.
The crystal-clear glue for virtually invisible fixes.
Strong and fast formula in a precise dispensing tool.
Strong and fast formula in a precise dispensing tool.
Tough, fast setting and Impact Tough.
Tough, fast setting and Impact Tough.
Grabs virtually anything with ultra-high strength.
Grabs virtually anything with ultra-high strength.
How to
